Conversion Requirements; Tools & Parts - Whirlpool Pro-Style Manual

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Tools Needed
Adjustable wrench
#2 Phillips screwdriver
7 mm nut driver
Parts Supplied
Check that all parts are included.
To convert from Natural Gas to LP:
LP Orifice Kit P/N: W10825584
■
To convert from LP to Natural Gas:
Natural Orifice Kit P/N: W10821163
■
High Altitude Conversion
To convert the cooktop for elevations above 6,560 ft
(1999.5 m), order a High Altitude Conversion Kit.
Part Number W10394294 – LP high altitude
■
Part Number W10394293 – Natural gas high altitude
■
To order, see the "Assistance or Service" section of the
Use and Care Guide.

CONVERSION REQUIREMENTS

Tools & Parts
Z\x" deep-well socket
Z\v" nut driver
Masking tape
WARNING
This conversion kit shall be installed by a
qualified service agency in accordance
with the manufacturer's instructions and
all applicable codes and requirements of
the authority having jurisdiction. If the
information in these instructions is not
followed exactly, a fire, explosion or
production of carbon monoxide may
result causing property damage, personal
injury or loss of life. The qualified service
agency is responsible for the proper
installation of this kit. The installation is
not proper and complete until the
operation of the converted appliance
is checked as specified in the
manufacturer's instructions supplied
with this kit.
3