Whirlpool Pro-Style Manual page 5

Remove Oven Door
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven
doors.
Failure to do so can result in back or other injury.
For normal range use, it is not suggested to remove the oven
door. However, removal is necessary when converting to LP
Gas. First, make sure the oven is OFF and cool. Then, follow
these instructions. The oven door is heavy.
1. Open oven door all the way. Flip the hinge latch forward on
each side.
2. Close the oven door as far as it will shut. Using 2 or more
people, lift the oven door while holding both sides.
Continue to push the oven door closed while pulling it away
from the oven door frame.
Remove Racks
Remove oven racks and the extendable roller rack from inside
the oven cavity. See the "Extendable Roller Rack" section
in the Use and Care Guide.
Remove Kick Plate
Option 1
1. Remove foam between door and kick plate.
2. Using a Phillips screwdriver, remove screws from
kick plate.
A
A. Kick plate
B. Remove these screws.
3. Lift up on kick plate to release plate from
shoulder screws.
4. Lay kick plate to the side to avoid scratching
the stainless steel.
Option 2
1. Remove kick plate from top of range and grate pack.
In packaging
A. Kick plate
Packaging removed
A. Kick plate
2. Lay kick plate to the side to avoid scratching
the stainless steel.
3. Remove screws from range.
A. Remove these screws.
B
A
A
5