Whirlpool Pro-Style Manual page 22

5. Replace with correct Natural gas orifice spud.
See the "Natural Gas Orifice Spud/Hood Chart."
Use the following chart to find the exact orifice spud
placement.
Remove choke from medium burner base.
Natural Gas Orifice Spud/Hood Chart
Burner
Rating To Identify Size
5,000 NG 5K 1.01 mm
BTUs Small
Burner Bag
15,000 No Color 1.75 mm
BTUs
20,000 Blue/Yellow 2.10 mm
BTUs Black 0.52 mm
18,000 Red 1.93 mm
BTUs
Burner orifice spud
A. Size stamp
22
Burner Style
Small burners
Medium burners
C
Choke
Large burner – main
Large burner – simmer
Simmer
Main
Grill burner
A
6. Place LP gas orifice in plastic parts bag for future use
and, keep with package containing literature.
NOTE: There may be extra orifices in your kit.
7. Replace the burner base.
8. Replace burner cap.
9. Replace burner grates.
10. Repeat steps 2 through 9 for the remaining burners.
Replace Oven Door
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven
doors.
Failure to do so can result in back or other injury.
A
1. Using 2 or more people, lift the oven door and insert both
B
hanger arms into the door. Make sure hanger arm notch
is seated on slot in door frame.
2. Open the oven door part way. You should hear a "click"
as the door is set into place. Then, open the oven door
all the way. Move the hinge levers back to the locked
position.
3. Check that the door is free to open and close. If it is not,
repeat the removal and installation procedures.
Slot in frame
Hanger arm
Notch