Whirlpool Pro-Style Manual page 10

6. Lift clip up on the oven bake burner electrode bracket with
a finger or flat-blade screwdriver.
B
A
A. Oven bake burner electrode bracket
B. Electrode bracket clip
7. Pull electrode out of bracket.
A
B
A. Grasp electrode here
B. Bracket
10
8. Apply masking tape to the end of a 7 mm nut driver to help
hold the gas orifice spud in the nut driver while changing it.
Insert nut driver into the gas opening, and press down onto
the gas orifice spud, then remove by turning the gas orifice
spud counterclockwise and lifting out. Set gas orifice
spud aside.
A
A. Gas orifice spud
9. Gas orifice studs are stamped with a letter and a number.
Install the Number 105 oven bake burner orifice spud.
10. Place Natural gas orifice in plastic parts bag for future use,
and keep with package containing literature.
11. Push down on the clip on the electrode bracket.
B
A
A. Oven bake burner electrode bracket
B. Electrode bracket clip