GBC HeatSeal Sprint H950 Instruction Manual page 8

© HeatSeal' Sprint" H950 - Load Film
AN Caution, Hot Surfaces A | Use instructions below if film is completely empty.
1
6-0
STEP 1
First, complete steps 2, 3and 4
from 'Load Film" page 7. Close 4
EZ levers.
STEP 2
Press "Feed" switch (forward) and
insert 'Feed Card" as shown. Insert
card with slight force through film
rollers.
STEP 3
Insert Idler Bar Assembly. Continue
pressing feed switch and wait for
Clear, wrinkle-free lamination.
STEP 4
Close top cover, scroll up or down
to select film thickness. Press
"Enter' to confirm. Press "Start" to
resume lamination.