GBC HeatSeal Sprint H950 Instruction Manual page 3

© HeatSeal" Sprint" H950 - Safety
Important Safety instructions А
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT TO
GBC. IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT ARE
IMPORTANT SAFETY MESSAGES. READ THESE MESSAGES CAREFULLY.
THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY
MESSAGE IN THIS INSTRUCTION MANUAL.
ON THE PRODUCT YOU WILL FIND IMPORTANT SAFETY MESSAGES.
READ THESE MESSAGES AND INSTRUCTIONS CAREFULLY. SAVE THESE
INSTRUCTIONS FOR LATER USE.
THE FOLLOWING WARNINGS ARE FOUND ON THIS PRODUCT.
Electrical shock hazard.
Do not open. No user.
serviceable parts inside.
Refer servicing to qualified
Wr service personel
This safety message means that you could be seriously hurt or killed if
you open the product and expose yourself to hazardous voltage.
Do not touch heat shoes until they have cooled.
'SHARP BLADE.
Keep hand and
fingers away.
This safety message means that you could cut yourself it you are not
careful
WARNING: THE SAFETY ALERT SYMBOL PRECEDES
EACH SAFETY MESSAGE IN THIS INSTRUCTION
MANUAL. THIS SYMBOL INDICATES A POTENTIAL
PERSONAL SAFETY HAZARD THAT COULD HURT YOU OR
OTHERS.
WARNING: DO NOT ATTEMPT TO SERVICE OR REPAIR
THE LAMINATOR.
WARNING: DO NOT CONNECT THE LAMINATOR TO AN
ELECTRICAL SUPPLY OR ATTEMPT TO OPERATE THE
LAMINATOR UNTIL YOU HAVE COMPLETELY READ
THESE INSTRUCTIONS. MAINTAIN THESE
INSTRUCTIONS IN A CONVENIENT LOCATION FOR
FUTURE REFERENCE.
Important Safeguards A
WARNING: FOR YOUR PROTECTION, DO NOT CONNECT
'THE LAMINATOR TO ELECTRICAL POWER OR ATTEMPT
TO OPERATE UNTIL YOU READ THESE INSTRUCTIONS
COMPLETELY. KEEP OPERATING INSTRUCTIONS IN A
CONVENIENT LOCATION FOR FUTURE REFERENCE. TO
GUARD AGAINST INJURY, THE FOLLOWING BASIC
'SAFETY PRECAUTIONS MUST BE OBSERVED IN THE
SET-UP AND USE OF THE LAMINATOR.
General safeguards
* Use this laminator only for its intended purposes as according to the
specifications outined in the operating instruction,
* Keep hands, long hair, loose clothing and articles such as necklaces
or ties away from the front of the pull rollers to avoid entanglement
and entrapment.
* Avoid contact with the heat shoes during operation or shorty after
the laminator has been tumed off, The heat shoes can reach
temperatures in excess of 300°
* Keep hands and fingers away from the path of the sharp film cutter
blade located at the film exit.
* Place the laminator on a stable cart, stand or table capable of supporting
at least 8005, An unstable surface may cause the laminator to fall
resulting in serious bodily injury. Avoid quick stops, excessive force and
uneven floor surfaces when moving the laminator on a cart or stand,
* Do not defeat or remove electrical and mechanical safety equipment
such as interlocks, shields and guards.
* Do not insert objects unsuitable for lamination
* Do not expose laminator to liquids.
Electrical safeguards
* This laminator must be connected to a supply voltage corresponding
to the electrical rating as indicated on the serial plate located on the
Tear of the machine.
* Unplug the laminator before moving it, or when itis not in use for an
extended period of time.
* Do not operate the laminator with a damaged power supply cord or
plug
* Do not overload electrical outlets as this can result in fire or shock.
* Do not alter the attachment plug. This plug is configured for the
appropriate electrical supply
The urit is intended for indoor use опу.
CAUTION: The receptacle must be located near the equipment
and easily accessible. Do not use an extension cord.
* Disconnect the attachment plug from the receptacle to which it is
connected and keep the power supply cord in your possession while
moving the laminator.
* Do not operate the laminator with a damaged power supply cord or
attachment plug, upon occurrence of a malfunction, or after
laminator has been damaged. Contact an authorized GBC service
representative for assistance.