GBC HeatSeal Sprint H950 Instruction Manual page 5

© HeatSeal" Sprint" H950 - Setup
Laminator comes pre-loaded with 3 mil film, Approximately 30ft.
STEP 1 STEP 4
In back of machine, Insert and secure
turn on power. feed tray into
Power light LED in position.
front control panel
lights up.
STEP 2 STEP 5
First time only, scroll Adjust "Side
К _ up or down to select Guides" to fit
= language setting,
P S then press "Enter". To documentis).
reset language, hold
down both scroll
CE У buttons for 5 seconds,
select language then
press enter.
STEP3
Open tray for
normal operation.
| | For longer paper or
banners close tray.