GBC HeatSeal Sprint H950 Instruction Manual page 14

© HeatSeal' Sprint" H950 - Specifications
1. Warm-up time
Note: If machine is warm, the warm up times are reduced
1.7 mil - 42 micron : Мах 2.5 minutes from cold
3 mil - 75 micron
i Мах 1 minutes from cold
5 mil - 125 micron Max 1 minutes from cold
2. Speed
A) The machine throughput speed is 39" (1000mm) per minute
B) Equivalent to 4 letter or A4 documents per minute
C) 50 letter or A4 sheets take approximately 12 minutes
3. Paper sizes and thickness
Max paper thickness ; 80 Ibs - 360 gsm
Min paper thickness i 20 Ibs - 75 gsm
; | 127 т, 11.6" - 297 mm
Мах paper width } T5 fim, 11" = 280 mm
Min paper width | 6'-152mm
Max paper length i 48'-1220mm
4. Border sizes
А4 paper (side border) 12" - 305 mm wide film ; 0.15" -4 тт
А4 paper (top & bottom border) 1 12°-305mm wide film : 0.25'-6mm
Letter paper (side border) 11.5" - 292 mm wide film
1 025'-6mm
Letter paper (top & bottom border) ! 11.5°- 292mm wide film : 0.25'-6 mm
5. Film thickness
1.7 mil - 42 microns i Very Flexible
3 mil - 75 microns i Flexible
5 mil - 125 microns ! Semi Rigid
6. Feeder capacity
A) Maximum of 50 sheets at 20 Ibs - 75 gsm
7. Machine weight
A) In box 79 Ibs - 36 kg
B) Out of box 70 Ibs - 32 kg
8. Dimensions (with tray open)
19" Wide x 31" High x 27" Deep
(483 mm Wide x 787mm High x 686mm Deep)
9. Electrical Specifications.
A) 120v @ 60Hz, 7A
B) 230v, 50Hz, 3.5A
C) 100v, Q) 50Hz/60Hz, 7A 14