Siemens SICHARGE D Operating Instructions Manual page 41

CHAdeMO plug
Figure 3-8 CHAdeMO plug
Table 3-6 Pin assignment of the CHAdeMO plug
No.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
The CHAdeMO connector has a locking button above the handle. After charging, press the
lock button to unlock and disconnect the plug from the vehicle.
An LED
active.
SICHARGE D
Operating Instructions, 11/2023, A5E50556539-AG
Contact
Protective Earth (PE)
Signal 1
---
Signal 2
DC negative pole (DC-)
DC positive pole (DC+)
Signal 3
CAN-H
CAN-L
Signal 4
LED
⑪
on the handle lights up when the interlock between the plug and the vehicle is
Use
Protective conductor
Initialization of the charging process
---
Release/lock the charging process
Negative pole for DC charging
Positive pole for DC charging
Detects presence of the plug
Data connection, CAN bus high signal
Data connection, CAN bus low signal
Start of the charging process after successful isolation test
Signals interlock
Description
3.6 Charging points
41