Maintenance and service
9.3 Servicing the charging station
Filter mat at front bottom right
The filter mat dimensions are 380 x 480 x 20 mm.
Figure 9-2 Filter mat at front bottom right
1. Remove the 2 knurled screws of the holding plate
2. Remove the holding plate
3. Remove the filter mat
Insert the new filter mat with the marking facing out in the reverse order.
Filter mat on back at top
The filter mat dimensions are 200 x 640 x 20 mm.
Figure 9-3 Filter mat on back at top
1. With the door open, pull down the filter cover
2. Remove the filter cover
3. Remove the 4 knurled screws
4. Remove the cabinet with the filter mat
5. Remove the 2 plates
6. Remove the filter mat
Insert the new filter mat with the marking facing out in the reverse order.
128
Operating Instructions, 11/2023, A5E50556539-AG
SICHARGE D