Sennheiser AMBEO Max Instruction Manual page 55

Inputs/outputs
HDMI TV (eARC) OUT
HDMI 1 IN
HDMI 2 IN
HDMI 3 IN
OPT IN
AUX IN
USB
ETHERNET
Subwoofer SW Pre-OUT
Microphone input for room
calibration
Remote control, model: SB01-RC
Transmission
Range
Power supply
WiFi
Standard
Transmission system
Transmission frequency
(country-specific)
Modulation 2.4 GHz band
Modulation 5 GHz band
Output power
default: HDMI 2.0a, eARC (HDMI 2.1)
control: CEC
video formats: up to 4K (60 Hz), Full
HD, MHL 2.1
encryption: HDCP 1.4
power supply for accessories
(external devices): 5 V
default: HDMI 2.0a
encryption: HDCP 2.2
control: CEC
video formats: up to 4K (60 Hz),
Full HD, MHL 2.1
HDR formats: Dolby Vision Pass-
Through
S/PDIF
supported sampling rates: up to
192 kHz
stereo RCA sockets
USB socket (type A), for power supply
for accessories (external devices):
⎓
5 V , 1 A; service socket for updates
RJ-45 socket, 100/10 MBit
mono RCA, max. 2 V
2.5 mm jack socket, mono
infra-red
approx. 8 m
coin cell, type CR2032, 3 V
IEEE 802.11 a/b/g/n/ac
2 x 2 MIMO
2,400 MHz to 2,483.5 MHz
5,170 MHz to 5,835 MHz
CCK, DQPSK, DBPSK for DSSS
64QAM, 16QAM, QPSK, BPSK for
OFDM
64QAM, 16QAM, QPSK, BPSK
100 mW (max)
AMBEO Soundbar | Max | 55
Specifications
⎓
, 1 A