Sennheiser AMBEO Max Instruction Manual page 42

Using the AMBEO Soundbar | Max
42 | AMBEO Soundbar | Max
▷
From the list of found Bluetooth devices, select "AMBEO Sound-
bar". If necessary, enter the default pin code "0000".
If pairing was successful, the
If no connection can be established within 3 minutes, the pair-
ing mode is terminated. If necessary, start the pairing mode
again.
ON
The device name of the Soundbar can be changed in the Smart Con-
trol app (e.g. "Soundbar family room").
Disconnecting the Soundbar from a Bluetooth device
▷
Via the menu of your Bluetooth device, disconnect the connection
to the Soundbar.
The Soundbar is disconnected from the Bluetooth device. The
display shows "Disconnected". The
Pairing the Soundbar with an NFC device (NFC pairing)
▷
Activate Bluetooth and NFC on your Bluetooth device.
▷
Place your NFC device close (distance < 3 cm) to the
on the Soundbar.
The status LED pulses blue. The devices are being paired.
If pairing was successful, the
ON
ON
status LED lights up blue.
< 20 cm
Pairing
Connected
Stan's iPhone
status LED
status LED lights up blue.
< 3 cm
Pairing
Connected
Stan's iPhone
Hold
2s
goes off.
NFC antenna