Release Notes
Firmware Version AMBEO | OS 1.0.225
Sonova Consumer Hearing recommends to always install the latest firmware version to ensure the best
performance of your product.
We have implemented the following:
With the launch of an all-new operating system, AMBEO | OS, the AMBEO Soundbar receives a major update
that expands its eco-system with support for AirPlay 2 and provides support for a completely new app
interface.
Important update 1.0.225
•
Bugfix which in some cases has led to faulty update of the Soundbar.
We are extremely sorry for the caused inconvenience!
Major new features of update 1.0.222
•
Apple AirPlay 2
New app design now accessible via new Sennheiser Smart Control app and from any browser in the
•
network (http://ambeo, or products IP address)
Additional bugfixes and features of 1.0.222
•
Persistently saved subwoofer setting. If the subwoofer setting is being turned off, it now remains off
even when rebooting the device.
•
Improved WiFi stability and repeater connectivity
WiFi localization feature to optimize WiFi performance
•
•
Now you´re able to setup WiFi via Smart Control app
Frequently asked questions about AMBEO | OS firmware
update
What is required to have this firmware installed?
Your AMBEO Soundbar needs to be connected to a network to be controllable via Smart Control app.
Automatic firmware update (Soundbar connected to the Internet):
To update the firmware automatically (normally during early morning time), the Soundbar must be connected
to the Internet via WiFi or Ethernet.
Sonova Consumer Hearing GmbH
Am Labor 1, 30900 Wedemark, Germany
AMBEO Soundbar SB01 China Version