Sennheiser AMBEO Max Instruction Manual page 41

Using the AMBEO Soundbar | Max
Connecting the Soundbar to a Bluetooth/
NFC device
Information on the Bluetooth wireless connection
The Soundbar features Bluetooth 4.2.
If your audio source supports one of the following high-resolution
audio encoding methods, music is automatically played in high audio
quality: AAC. Otherwise the Soundbar will play back your music in
normal audio quality (SBC).
When selecting the "Bluetooth" input or when switching on with the
last used input "Bluetooth", the Soundbar automatically tries to con-
nect to the last used Bluetooth device.
The Soundbar can save the connection profiles of up to eight Blue-
tooth devices with which it has been paired.
If you pair the Soundbar with the ninth Bluetooth device, the saved
connection profile of the least used Bluetooth device will be over-
written. If you want to re-establish a connection with the overwritten
Bluetooth device, you have to pair the earphones again.
If a device is connected, you first have to disconnect it to connect a
new device.
You can use the Near Field Communication (NFC) function for easy
pairing of the devices.
Pairing the Soundbar with a Bluetooth device
▷
Activate Bluetooth on your Bluetooth device.
▷
Press the multi-function button
onds.
The status LED pulses blue.
The Soundbar is in pairing mode.
▷
Hold your Bluetooth device at a distance of approx. 7.87"/20 cm
to the Soundbar.
▷
Via the menu of your Bluetooth device, start the search for new
Bluetooth devices.
All active Bluetooth devices in the proximity of your Bluetooth
device are displayed.
Using the AMBEO Soundbar | Max
paired +
connected
paired
and the SOURCE button for 2 sec-
AMBEO Soundbar | Max | 41