Sennheiser AMBEO Max Instruction Manual page 16

Installing the AMBEO Soundbar | Max
16 | AMBEO Soundbar | Max
Installing the AMBEO Soundbar |
Max
Placing the Soundbar on the device feet
CAUTION
Material damage due to overheating
Inadequate ventilation may cause the Soundbar to overheat.
▷
Do not place any objects on the Soundbar, keep the minimum
clearances and ensure circulating ventilation.
CAUTION
Staining of furniture surfaces!
Varnish or furniture polish may degrade the feet of the product,
which could stain your furniture.
▷
Do not place the product on delicate surfaces. Use a non-slip pad
under the product if necessary.
▷
With the help of a second person, take the Soundbar out of the
packaging.
▷
Remove the protective foil.
▷
Remove the protective foil from the OLED display.
▷
With the help of a second person, place the Soundbar on a sturdy,
level, horizontal piece of furniture that can safely carry the weight
of the Soundbar (approx. 18.5 kg).
▷
Observe the following:
– The distance X of the Soundbar to the side walls should ideally
be the same so that the Soundbar is centered in the room. The
optimum distance between the Soundbar and the walls is
between 1 and 5 meters.
– There must be no objects between the Soundbar, the side walls
and the ceiling of the room that block sound or have a strong
sound-absorbing effect (e.g. furniture such as shelves or arm-
chairs, room dividers, curtains, flower pots).
– The distance X
between 1 and 5 meters, but should not exceed 5 meters. The
ceiling should be flat and horizontal (no pitched roof or domed
roof).
– The Soundbar should be positioned below the TV.
of the Soundbar to the ceiling should be