Sennheiser AMBEO Max Instruction Manual page 43

Disconnecting the Soundbar from an NFC device
▷
Place your paired NFC device close (distance < 3 cm) to the
antenna on the Soundbar.
The Soundbar is disconnected from the NFC device. The display
shows "Disconnected". The
Installing the Sennheiser Smart Control
app
To be able to control the Soundbar using a smartphone, the Sound-
bar and the smartphone on which you install the Sennheiser Smart
Control app must be connected to the same WiFi network.
To make full use of all the settings and functions of the AMBEO
Soundbar | Max, you have to have the free Sennheiser Smart Control
app installed on your smartphone.
▷
Download the Sennheiser Smart Control app from the Apple App
Store or from Google Play and install it on your smartphone. Alter-
natively, you can visit the following website:
www.sennheiser-hearing.com/smartcontrol
Establishing the initial connection between the Sennheiser Smart
Control app and the Soundbar
The initial connection between the Sennheiser Smart Control app
and the Soundbar is established via Bluetooth Low Energy. For this,
Bluetooth must be activated on your smartphone.
After the initial connection via Bluetooth is established, you can set
up a WiFi connection for the Soundbar in the Smart Control app
44). In doing so, the Smart Control app can then connect to the
Soundbar via WiFi.
▷
Make sure that the Soundbar is properly connected to the power
supply.
▷
Make sure that the smartphone you want to connect to has the
Smart Control app installed and Bluetooth and WiFi are activated.
▷
Start the Smart Control app.
▷
Follow the instructions in the Smart Control app.
The Smart Control app recognizes the Soundbar and activates all
available settings and functions.
If the initial connection between the Smart Control app and the
Soundbar via Bluetooth fails, the Soundbar may have already
been paired with the smartphone via Bluetooth.
In this case, you have to delete all entries of the Soundbar in the
Bluetooth menu of the smartphone.
Then start a new connection attempt.
Configuring the Soundbar without the Sennheiser Smart Control
app
▷
Connect your smartphone or computer to the Soundbar's WiFi
hotspot.
The Soundbar's WiFi network name is "AMBEO Soundbar [serial
number]".
Using the AMBEO Soundbar | Max
status LED goes off.
AMBEO Soundbar | Max | 43
NFC
(>