Sennheiser AMBEO Max Instruction Manual page 27

Connecting a subwoofer (optional)
Optionally, you can connect a subwoofer to the Soundbar.
▷
Recommended settings: Adjust the volume on the subwoofer to
"approx. 50%" and set the crossover to "Max".
▷
Connect one connector of the mono RCA cable (to be ordered
separately) to the SW PRE OUT
▷
Connect the other connector of the cable to the socket LOW
LEVEL IN/MONO of the subwoofer.
▷
Calibrate the Soundbar
Disconnecting the subwoofer
When the subwoofer is disconnected from the Soundbar, the Sound-
bar uses the previous calibration without subwoofer, if one exists.
The app allows you to choose between the calibration with and with-
out subwoofer.
Connecting devices to the Soundbar
socket on the Soundbar.
(> 31).
1
2
AMBEO Soundbar | Max | 27
Volume: 50 %
Crossover: Max
LOW LEVEL
IN/MONO
3