Technical Data - GEM 533 eSyStep Operating Instructions Manual

7 Technical data

7 Technical data
7.1 Medium
Working medium:
Max. permissible viscos-
ity:
7.2 Temperature
Media temperature:
Ambient temperature:
7.3 Pressure
Operating pressure:
Leakage rate:
GEMÜ 533 eSyStep
Positioner (Code S0)
Corrosive, inert, gaseous and liquid media which have no negative impact on the physical and
chemical properties of the body and seal material.
600 mm²/s
Other versions for lower / higher temperatures and higher viscosities on request.
-10 — 180 °C
0 — 60 °C
* depending on version and/or operating parameters (see chapter Duty cycle and service life)
DN Actuator size 0 (code
15
20
25
32
40
50
All pressures are gauge pressures.
For max. operating pressures the pressure / temperature correlation must be observed.
Higher operating pressures on request
Control valve
Seat seal Standard
Metal DIN EN 60534-4
PTFE, FKM, EPDM DIN EN 60534-4
Actuator size 1 (code
0A)
Open/Close valve (code
15
10
6
-
-
-
Test procedure
1
1
10 / 64
Actuator size 1 (code
1A), 1A),
control valve (code S0)
A0)
40 25
32 15
23 10
15 6.5
9 4
6 1
Leakage rate Test medium
IV
VI
www.gemu-group.com
Air
Air