GEM 533 eSyStep Operating Instructions Manual page 33

Index Sub- Access
Index rights
0x4F 1 R/W
2 R/W
0x50 1 R/W
2 R/W
3 R/W
4 R/W
0x51 1 R/W
2 R/W
3 RO
4 RO
0x53 1 RO
2 RO
3 RO
0x55 1 RO Calibrated positions
2 RO
0x60 1 RO
2 RO
3 RO
4 RO
0x62 1 RO
2 RO
0x90 2 R/W
www.gemu-group.com
Index name Parameter
Error action Error action
Error time
Basic settings Inversion of LED col-
On site initialization
Operating mode
IO-Link process data Activate/deactivate
Actuator position Open request
feedback
Close request
Open real
Close real
Initialized positions
Analog values Potentiometer
Supply voltage
Temperature
Set value (W)
Operating times
Drive sets
Function
Set safety position
Determine time
from error detection
to error message
Activate / deactiv-
ours ate inversion of
LEDs
Activate / deactiv-
ate on site initializa-
tion
Operating mode
change-over (posi-
tioner; ON/OFF)
use of IO-Link pro-
cess data
Request valve posi-
tion OPEN
Request valve posi-
tion CLOSED
Real valve position
OPEN
Real valve position
CLOSED
Open Analog value valve
position OPEN
Close Analogue value
valve position
CLOSED
Stroke Read out the analog
value for stroke (dif-
ference between
OPEN and CLOSED).
Max. OPEN end position
Min. CLOSED end posi-
tion
Analog value poten-
tiometer
Analog value supply
voltage
Analog value tem-
perature sensor
Analog value set
value signal
Open Operating time
OPEN
Close Operating time
CLOSE
Force Force, dependent on
valve used
33 / 64
12 Specific data IO-Link (pin 6)
Default Setting options
settings
2 0 → Hold
1 → Open
2 → Close
1 (0.1s) 1 ... 1000
(0.1s ... 100s)
0 0 → Standard
1 → Inversed
0 0 → Enabled
1 → Disabled
0 0 → Positioner
1 → On/Off
0 0 → Disabled
1 → Enabled
900 30 ... 970
(90.0%) (3.0 ... 97.0%)
100 30 ... 970
(10.0%) (3.0 ... 97.0%)
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 0 to 255
(0 to 25.5s)
0 0 to 255
(0 to 25.5s)
1 ... 6
GEMÜ 533 eSyStep
Positioner (Code S0)