Installing Wire Spool And Adjusting Hub Tension - Miller Millermatic 190 Owner's Manual

5-11. Installing Wire Spool And Adjusting Hub Tension

Installing 4 in. (102 mm) Wire Spool
Installing 8 in. (203 mm) Wire Spool
Adapter and
retaining ring
Tools Needed:
OM-264761 Page 20
.
A complete Parts List is available on-line at www.MillerWelds.com
Align locking hole in
spool with locking
pin on spool hub.
1/2 in.
When a slight force is needed
to turn spool, tension is set.
When a slight force is
needed to turn spool, ten-
sion is set.
803 012 / 267 865-A