Section 4 − Specifications; Serial Number And Rating Label Location; Unit Specifications; Environmental Specifications - Miller Millermatic 190 Owner's Manual

4-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located on back. Use rating label to determine input power requirements and/or rated output.
For future reference, write serial number in space provided on back cover of this manual.

4-2. Unit Specifications

.
Do not use information in unit specifications table to determine electrical service requirements. See Sections 5-2 and 5-3 for information on con-
necting input power.
Rated Welding
Amperage Range
Output
140 A @ 21
Volts DC, 40%
30 − 190
Duty Cycle
Solid
Wire Type
.024 - .030 in.
And Dia
(0.6 - 0.8 mm)
*See unit rating label and Section 3-2

4-3. Environmental Specifications

A. IP Rating
This equipment is designed for indoor use and is not intended to be used or stored outside.
Notes
.
A complete Parts List is available on-line at www.MillerWelds.com
SECTION 4 − SPECIFICATIONS
Maximum
Open-Circuit
Voltage DC
(U *)
0
45
Stainless Flux Cored
.023 - .030 in.
.030 - .035 in.
(0.8 - 0.9 mm)
(0.6 - 0.8 mm)
Amperes Input at
Rated Load Out-
KVA
put 240 V, 60 Hz,
Single-Phase
21 5
Wire Feed Speed Range
60 − 600 IPM (1.5 − 15.2 m/min) Feeding Wire
IP Rating
IP21
Weight Overall
KW
W/Gun Dimensions
Length: 20-1/2 in.
(521 mm)
39 lb
Width: 11-1/4 in.
3.8 (17.7 kg)
(286 mm)
Height: 12-1/2 in.
(318 mm)
IP21 2014−06
OM-264761 Page 11