Installing Welding Gun; Installing Wire Spool And Adjusting Hub Tension - Miller Gold Seal GS-250 Owner's Manual

2-7. Installing Welding Gun

1

2-8. Installing Wire Spool And Adjusting Hub Tension

Tools Needed:
15/16 in
OM-1311 Page 12
2 4
3
When a slight force is needed to turn spool, tension is set.
1 Drive Assembly
2 Gun Securing Knob
3 Gun End
Loosen securing knob. Insert gun
end through opening until it bottoms
against drive assembly. Tighten
nut.
4 Gun Trigger Plug
Insert plug into receptacle, and
tighten threaded collar.
Close door.
Use compression spring with
8 in (200 mm) spools.
Ref. 800 921-C
072573-B