Removing Mig Gun After Installation To Replace With A Spool Gun - Miller Millermatic 190 Owner's Manual

.
A complete Parts List is available on-line at www.MillerWelds.com

5-14. Removing MIG Gun After Installation To Replace With A Spool Gun

Open Pressure Assembly
Cut Off End Of Wire
Turn Off Power
Knob
.
Hold wire tightly to keep it
from unraveling.
Loosen Knob, Disconnect Gun Trigger
Rewind Wire Onto Spool, Fasten
Plug, And Remove Gun From Unit
End Of Wire To Spool
(See Section 5-9 for gun installation)
270 208-B / Ref. 802 982-A / Ref. 267 805-A / Ref. 267 807-A
OM-264761 Page 23