Fln Protocol Technical Data - York AYK 550 User Manual

176

FLN Protocol Technical Data

Overview
The FLN fieldbus connection to the AYK550 drives is based on an industry standard
RS-485 physical interface. The FLN (Floor Level Network) Fieldbus protocol is a
serial communication protocol, used by the Siemens APOGEE® system. The
AYK550 interface is specified in Siemens application 2734.
Supported Features
The AYK550 supports all required FLN features.
Reports
The AYK550 provides seven pre-defined reports. Using a report request generated
from the FLN fieldbus controller, select one of the following sets of points. By
providing views of selected points, these reports are often easier to work with than
views of the full point database.
YORK AYK550
Point
#
01
02
20
29
Startup
Point
#
21
22
23
24
25
26
34
35
36
60
61
68
69
Serial Communication – EFB
Subpoint Name
Type
LAO CTLR ADDRESS
LAO APPLICATION
LAO OVRD TIME
LDO DAY.NIGHT
Subpoint Name
Type
LDI FWD.REV
LDO CMD FWD.REV
LDI STOP.RUN
LDO CMD STP.STRT
LDI EXT1.2 ACT
LDO EXT1.2 CMD
LDI ENA.DIS ACT
LDO ENA.DIS CMD
LDI FLN LOC ACT
LAO INPUT REF1
LAO INPUT REF2
LDO FLN LOC CTL
LDO FLN LOC REF
FLN ABB AYK550 Report
Each host FLN application (e.g. CIS or Insight) controls
both the particular data reported for each point, and the
report format.
FLN Startup Report
Each host FLN application (e.g. CIS or Insight) controls
both the particular data reported for each point, and the
report format.
AYK550-UH User's Manual
Data
Data