11.10
Installing the lower triple clamp
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing
–
Check whether upper steering head seal
tioned.
–
Push on protective ring
F02885-10
–
Position the upper triple clamp and handlebar.
–
4
Mount nut
Guideline
Nut, steering head
F03103-10
–
Position the fork legs.
Bleeder screws
Info
The second milled groove in the fork leg must be flush
with the upper edge of the upper triple clamp.
F02179-11
SERVICE WORK ON THE CHASSIS 11
p. 111)
1
.
2
3
.
, but do not tighten yet.
M20x1.5
10 Nm (7.4 lbf ft)
5
are positioned toward the rear.
is correctly posi-
43