12 BRAKE SYSTEM
12.6
68
V02822-11
309386-11
Checking the front brake linings
Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
V02823-10
Main work
–
Move the brake fluid reservoir mounted on the handlebar to a
horizontal position.
–
1
Remove screws
.
–
2
Take off cover
with membrane
–
Add brake fluid up to level
Guideline
A
Level
(brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.
–
Check the brake linings for minimum thickness
A
Minimum thickness
»
If the minimum thickness is less than specified:
–
Change the brake linings of the front brake.
(
p. 69)
–
Check the brake linings for damage and cracking.
»
If damage or wear is encountered:
–
Change the brake linings of the front brake.
(
p. 69)
3
.
A
.
4 mm (0.16 in)
p. 109)
A
.
≥ 1 mm (≥ 0.04 in)