Checking The Rear Brake Linings - KTM 65 SX 2023 Owner's Manual

12 BRAKE SYSTEM
12.13
74
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid corrodes paint.
Only use clean brake fluid from a sealed container.
V02826-10
H00115-10

Checking the rear brake linings

Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Check the rear brake linings. (
Main work
–
1
Remove screws .
–
2
Take off cover with membrane
–
Add brake fluid up to level
Guideline
A
Level (brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover and the membrane.
–
Mount and tighten the screws.
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.
Finishing work
–
Remove the motorcycle from the lift stand. (
p. 38)
p. 74)
3
.
A
.
10 mm (0.39 in)
p. 109)
p. 38)