Checking The Rubber Grip; Additionally Securing The Rubber Grip; Adjusting The Basic Position Of The Clutch Lever; Checking The Fluid Level Of The Hydraulic Clutch - KTM 65 SX 2023 Owner's Manual

11.38

Checking the rubber grip

11.39

Additionally securing the rubber grip

11.40

Adjusting the basic position of the clutch lever

11.41

Checking the fluid level of the hydraulic clutch

Info
The fluid level rises with increasing wear of the clutch facing discs.
–
Check the rubber grips on the handlebar for damage, wear,
and looseness.
» If a rubber grip is damaged, worn, or loose:
–
Change the rubber grip.
Rubber grip adhesive (00062030051) (
–
Additionally secure the rubber grip. (
401197-01
Preparatory work
–
Check the rubber grip. (
Main work
–
Secure the rubber grip at two points using the securing wire.
Securing wire (54812016000)
Wire twister forceps (00029015100)
The twisted wire ends face away from the hands and are
bent toward the rubber grip.
401198-01
–
Adjust the basic position of the clutch lever to the size of the
rider's hand using adjusting screw
Info
Turn the adjusting screw clockwise to increase the
distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease
the distance between the clutch lever and the handle-
bar.
The range of adjustment is limited.
V02820-12
Turn the adjusting screw by hand only, and do not
apply any force.
Do not make any adjustments while riding.
SERVICE WORK ON THE CHASSIS 11
p. 61)
1
.
p. 112)
p. 61)
61