11.7
Removing the fork legs
11.8
Installing the fork legs
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Remove screws
–
Allow the brake caliper and brake line to hang loosely to the
side.
Info
Do not kink the brake line.
V02836-10
–
Loosen screws
–
Loosen screws
F02907-10
Main work
–
Position the fork legs.
Bleeder screws
Info
The second milled groove in the fork leg must be flush
with the upper edge of the upper triple clamp.
F02179-10
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Tighten screws
Guideline
Screw, bottom triple
clamp
F02907-11
SERVICE WORK ON THE CHASSIS 11
(
p. 78)
1
and take off the clamp.
2
and take off the brake caliper.
3
. Remove the left fork leg.
4
. Remove the right fork leg.
1
are positioned toward the rear.
2
.
M8
20 Nm (14.8 lbf ft)
3
.
M8
15 Nm (11.1 lbf ft)
p. 38)
41