LG TROMM F2996NCZ Instruction Manual page 89

Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 49
온수헹굼
Use this option to remove fine detergent materials
remaining in textile.
NOTE
• This option is only available for some washing cycles.
물온도
Use this option to change the water temperature.
NOTE
• Depending on the washing cycle selected, the water
temperature range may vary.
버튼음
Use this option to turn on/off the sound heard when the
button is pressed.
배수멈춤
Use this option to prevent automatic draining after
washing is finished.
Press the 전원 button.
1
Select a cycle by turning the cycle selection dial.
2
Press the 배수멈춤 button.
3
• No water will be drained even after rinsing is
finished.
After rinsing, press the 동작/일시정지 button.
4
• Water draining and spin drying will start.
건조
Use the cycles for general drying.
NOTE
• Do not exceed the max capacity of drying.
• To prevent wrinkles caused by excessive drying, the
drying level it set low. If you need additional drying
after termination, then press the 건조 button.
• During the dying process, the cycles of water supply
and drain will repeat. This is normal operation to
improve the drying performance.
• When you dry chemical textile laundry and take it
out from the washing bucket, static electricity can be
generated by frictions. If you use fabric softener during
rinsing to reduce the level of static electricity.
• Refer to the ʻDrying Capacity Labelʼ on the right side
to the washing bucket door when you insert laundry.
The label indicates the max drying capacity based on
dry clothes.
• Except for the Time Drying cycle (time selection), all
the Drying cycles can automatically detect the drying
condition and the displayed time may differ from
the actual operation time. Depending on the drying
condition, specific time can be displayed while the
drying process is taking place.
CAUTION
• If you violate the instructions in the user manual, then
our company will not be held responsible for any
consequences.
• If you use the automatic process from washing to
drying, then you must make sure that the max drying
capacity is not exceeded.
• Depending on the type of textile, laundry can shrink
or deform. Check if the type of laundry can be dried in
that specific process.
• During the Drying process, water is used to remove
moistures. So, make sure to open the faucet.
• If water supply is poor or water pressure is low, then
drying cannot be done properly.
• During or after drying, when you want to take out
laundry, the zippers, the product inner area, or the
washer door can be very hot. So, be careful.
41

Advertisement

Table of Contents
loading

Table of Contents