LG TROMM F2996NCZ Instruction Manual page 66

Connecting Water Supply Hose to
Rounded Faucet
When installing a water supply hose, examine the shape
of faucet and connect as follows.
Adjust the fixing screw for the coupling device.
1
• Adjust the four fixing screws for the coupling
device to fit the size of water faucet. If the water
faucet is big, then remove the guide board before
making adjustments.
Big
headed
screw
Small
headed
screw
Fix a coupling device on the faucet.
2
• Make sure that the big headed screw is faced
to the wall, so that the rubber packing in the
coupling device is firmly pressed to the faucet.
• After turning the big headed screws (2 units) by
hands until they reach the water faucet, use a
driver to firmly fix the two small headed screws.
Coupling device
Rubber packing
Connect an intermediate coupling device to the
3
connector.
• Remove the fixing sticker and turn the
intermediate coupling device clockwise until
securely fixed while making sure that the screw
threads are maintained. If you don't securely fix
it, it can cause water leakages.
Coupling device
Intermediate
coupling device
18
Faucet outer
diameter
Big headed screw
Fixing sticker
While pressing down the Press lever and the Press
4
board for the water supply hose at the same time,
connect it to the intermediate coupling device.
• You will hear the clicking sound when a
connection is made.
Intermediate
coupling device
After connecting the water supply hose to the water
5
faucet, turn on the water faucet.
• After connecting the water supply hose to
the faucet, let the water flow to remove alien
substances from the inside of the water hose.
After that, turn off the water faucet again.
After connecting the water supply hose to the
6
product, turn on the water faucet.
• Connect the cold water valve (blue) to the
cold water supply inlet and the hot water valve
(orange) to the hot water supply inlet.
• If you connect it without a rubber packing, it can
cause water leakages.
• If water leaks, then start checking again from the
beginning.
• If you have only one water faucet, then connect it
to the cold water supply inlet. After a connection,
water supply could be stopped for about three
minutes, so that the machine determines which
is cold or hot water.
Cold water
supply inlet
Press handle
Press board
Rubber packing
Hot water
supply inlet