Connecting Water Supply Hoses - LG TROMM F2996NCZ Instruction Manual

Connecting Water Supply Hoses

Separating Water Supply Hoses
Before making a connection, separate the water supply
hose in the shipping condition. If not, a complete
connection cannot be achieved, causing water leakages.
Turn the connector counterclockwise to separate it
1
from the intermediate coupling device.
Coupling
device
Intermediate
coupling device
While pressing down the Press Lever and the
2
Press Board at the same time, pull it down to
separate the water supply hoses.
• If not, a complete connection cannot be
achieved, causing water leakages.
Press lever
Press board
Water supply hose
NOTE
• Connect the new water supply hose provided in
the product package. An old hose can cause water
leakages. Do not use it.
• If you need to extend the water supply hose by
connecting it to the water supply hose connector, you
need to purchase extra hoses from the LG Electronics
service center.
• In case that the product installation location is
changed or you move to a new house, keep your
coupling device, intermediate coupling device and
screw type intermediate coupling device in a safe
place.
• If you have selected water temperature other than
cold water, both hot and cold water will be supplied.
If you just use one of hot or cold water, you must
connect to the cold water supply inlet. The remaining
hose can be connected to the currently used hose by
using a coupling device, and the overall hose length
can be extended.
• The water pressure of 30~1000 kPa is used.
Water supply hose
connector
17