Installing The Slipping Prevention Seats - LG TROMM F2996NCZ Instruction Manual

If the auto height adjuster is lifted from the ground,
then release the leveling adjusting leg in the opposite
diagonal until a proper height is reached.
If the auto height adjuster is completely pressed to the
ground, then release the two leveling adjuster legs by
same steps, so that the auto height adjuster is relaxed.
16
Installing the Slipping Prevention
Seats
Install the slipping prevention seats on a wet floor such
as in the bathroom.
Completely wipe off the installation floor.
1
• Completely wipe off mold or moss from the floor.
• If you install the slipping prevention seats without
removing water, it can cause a fall-off. So, make
sure to remove water.
Attach the contact surface of your slipping
2
prevention seats to the floor.
• For the best effects, you need to install the
slipping prevention seats to the left/right legs of
the product front.
• If it is hard to do so, then attach it to the left/right
legs of the product rear.
Install the product on the rough side.
3
4
While attaching it, the leveling condition can be
damaged. So, after attaching it, check if the product
is leveled.
Slipping prevention surface
Contact surface