Schwinn 170 Service Manual page 9

Condition/Problem
Clicking sound when
pedaling
Seat post movement
Workout results will not
sync with Bluetooth en-
®
abled device
Console Setup Mode – 170 / 270 series (MY17) Console
The Console Setup Mode lets you input the date and time, set the units of measurement to either English or Metric,
1. Hold down the PAUSE/END button and Right button together for 3 seconds while in the Power-Up Mode to go into
the Console Setup Mode.
Note: Push PAUSE/END to exit the Console Setup Mode and return to the Power-Up Mode screen.
2. The Console display shows the Date prompt with the current setting. To change, push the Increase/Decrease buttons
active value (month / day / year).
3. Push OK to set.
4. The Console display shows the Time prompt with the current setting. Push the Increase/Decrease buttons to adjust
(hour / minute / AM or PM).
5. Push OK to set.
6. The Console display shows the Units prompt with the current setting. To change, push OK to start the Units option.
Push the Increase/Decrease buttons to change between "MILES" (Imperial English units) and "KM" (metric units).
Note: If the units change when there is data in User Statistics, the statistics convert to the new units.
7. Push OK to set.
8. The Console display shows the Sound Settings prompt with the current setting. Push the Increase/Decrease buttons
to change between "ON" and "OFF".
9. Push OK to set.
10. The Console display shows the TOTAL RUN HOURS for the machine.
11. The Console display shows the Software Version prompt. Push OK to go to the next prompt.
Things to Check
Check pedal to crank arm
connection
Check locking pin
Check adjustment knob
Current console mode
Total time of workout
Fitness machine
Bluetooth enabled device Consult your device to be sure that the Bluetooth
®
Fitness App
Remove pedals. Make sure there is no debris on threads, and
reinstall the pedals
Be sure adjustment pin is locked into one of the seat post
adjustment holes.
Be sure knob is securely tightened.
Machine must be in Idle Mode to sync. Push the PAUSE/STOP
button until the Power-Up Mode screen is displayed.
A workout must be longer than 1 minute to be saved and
posted by the Console.
Unplug unit from electrical outlet for 5 minutes. Reconnect to
outlet.
feature has been enabled on it.
is compatible.
Contact appsupport@nautilus.com (if inside US/Canada)
or your local distributor (if outside US/Canada) for further
assistance.
® reading string.
9
Solution
wireless
®