Schwinn 170 Service Manual page 31

Note: Your machine may not match the image. For reference only.
1. Unplug the AC Adapter from the wall outlet and machine.
2.
Remove the Seat Post and the Seat Adjustment Knob (A).
Set them safely aside for reassembly.
3. Remove the Seat Post Shroud and set it safely aside for
reassembly.
4.
from the Crank Arm (C) to expose the Hex Head Bolt (D).
5. Using a 13 mm wrench and socket, remove the Hex Head
Bolt (D) .
6.
Thread the Crank Puller into the Crank Arm (C). When the
Crank Puller is in the correct position, only 1-2 threads on the
outer portion (CP2) of the Crank Puller should show.
Note: Be sure the end of the Bolt (CP1) of the Crank Puller is
7. Using a wrench, turn the inner portion (CP3) of the Crank
tightened.
A
CP1
CP2
CP3
31
B
C
C
D
CP2 CP3
C C