Schwinn 170 Service Manual page 16

6. Reassembly is the reverse procedure.
NOTICE: Be sure not to cut or pinch any cables.
130/230 bikes—To reinstall the Pedals, carefully align the
threads and hand tighten to prevent cross-threading. Then
tighten fully with pedal wrench.
Note: The Left Pedal is reverse-threaded. Orientation is
based from a seated position on the bike. The Left
Pedal has an "L", the Right Pedal an "R".
16. Final Inspection
Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
!
inspected for correct performance in accordance with the
Owner's Manual.
16