Schwinn 170 Service Manual page 43

Disconnect all power to the machine before you service it.
!
Note:
1.
Remove screws that attach Console to the Mast.
2. Disconnect the Data Cable and Heart Rate Cable from
the back of the Console. Set the Console and screws safely
aside for reassembly.
Note: Do not let the cables fall down inside the Mast.
3.
reassembly.
4.
Bend the edges of the Top Shroud to disengage the in-
side tabs from the Main Assembly, and slide the Top Shroud
up the Mast.
5. Remove the hardware (indicated) from the Mast.
hardware safely aside for reassembly.
NOTICE: Do not cut or pinch the cables. This step may
require two people.
Note: Do not let the cable fall down inside the Frame.
43
X2