Table of Contents
Advertisement
Subject movement (whether subjects are still or moving) may not be detected
z
correctly for some subject or shooting conditions.
Scene Intelligent Auto/Hybrid Auto (Fully Automatic)
4
Focus on the subject.
Press the shutter button halfway to
z
focus.
If [D] blinks, use the <D> lever to raise
z
the built-in flash.
You can also focus by tapping a person's
z
face or another subject on the screen
(Touch AF) when [z: Continuous AF]
is set to [Disable].
Under low light, the AF-assist beam
z
( = 217) is automatically activated if
needed.
For stationary subjects, the AF point is
z
displayed in green when the subject is in
focus, and the camera beeps. (One-Shot
AF/< A > only)
For moving subjects, the AF point is
z
displayed in blue (< A > only) and
tracks subject movement. The camera
does not beep. (Servo AF)
5
Take the picture.
Press the shutter button completely to
z
take the picture.
The image just captured will be
z
displayed for approx. 2 sec. on the
screen.
To retract the built-in flash, push it down
z
with your fingers.
73
Advertisement
Table of Contents
