Canon ICAM62B Advanced User's Manual page 472

Table of Contents

Advertisement

Responding to Error Messages
65: Wireless LAN connection lost
Are any obstacles blocking the line of sight between the camera and the
z
antenna of the access point?
Move the antenna of the access point to a position clearly visible
B
from the point of view of the camera ( = 476).
The Wi-Fi connection was lost for some reason, and the connection
z
cannot be restored.
The following are possible reasons: excessive access to the access
B
point from another device, a microwave oven or similar appliance in
use nearby (interfering with IEEE 802.11b/g/n (2.4 GHz band)), or
influence of rain or high humidity ( = 476).
66: Incorrect wireless LAN password
Are the camera and the access point set to use the same password for
z
authentication?
The setting is case-sensitive, so check upper- and lower-case
B
characters. Make sure that the correct password for authentication is
set on the camera.
67: Incorrect wireless LAN encryption method
Are the camera and the access point set to use the same encryption
z
method?
The camera supports the following encryption methods: WEP, TKIP,
B
and AES.
If filtering by MAC address is active, is the MAC address of the camera in
z
use registered at the access point?
Register the MAC address of the camera used to the access point.
B
The MAC address can be checked on the [View info] screen
( = 463).
472

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eos m6 mark iiIcam62bkIcam62bk2aIcam62bk2

Table of Contents