Table of Contents
Advertisement
23: Device with same IP address exists on selected network
What to check on the camera
Do the camera and another device connected via Wi-Fi to the same
z
network have the same IP address?
Change the camera's IP address to avoid using the same address
B
as another device on the network. Otherwise, change the IP address
of the device that has a duplicate address.
If the camera's IP address is set to [Manual setting] in network
B
environments using a DHCP server, change the setting to [Auto
setting] ( = 445).
Responding to Error Messages 21–23
Also check the following points when responding to errors numbered 21–23.
z
Are the camera and the access point set to use the same password for
z
authentication?
y This error occurs if the passwords do not match when the authentication
method for encryption is set to [Open system]. The setting is case-sensitive,
so check upper- and lower-case characters. Make sure that the correct
password for authentication is set on the camera ( = 464).
Responding to Error Messages
469
Advertisement
Table of Contents
