Table of Contents
Advertisement
21: No address assigned by DHCP server
What to check on the camera
On the camera, IP address is set to [Auto setting]. Is this the correct
z
setting?
If no DHCP server is used, specify the settings after setting the IP
B
address to [Manual setting] on the camera ( = 446).
What to check on the DHCP server
Is the power of the DHCP server on?
z
Turn on the DHCP server.
B
Are there enough addresses for assignment by the DHCP server?
z
Increase the number of addresses assigned by the DHCP server.
B
Remove devices assigned addresses by the DHCP server from the
B
network to reduce the number of addresses in use.
Is the DHCP server working correctly?
z
Check the DHCP server settings to make sure it is working correctly
B
as a DHCP server.
If applicable, ask your network administrator to ensure the DHCP
B
server is available.
Responding to Error Messages
467
Advertisement
Table of Contents
