Table of Contents
Advertisement
General Movie Recording Cautions
Red [E] Internal Temperature Warning Icon
If the camera's internal temperature increases due to prolonged movie
z
recording or under a high ambient temperature, a red [E] icon will appear.
The red [E] icon indicates that movie recording will soon be terminated
z
automatically. If this happens, you will not be able to shoot again until the
camera's internal temperature decreases. Turn off the power and let the
camera rest for a while.
Recording a movie at a high temperature for a prolonged period will cause the
z
red [E] icon to appear earlier. When you are not shooting, always turn off the
camera.
If [F] is displayed, see = 567.
z
Recording and Image Quality
Image Stabilizer is active all times, even without the shutter button pressed
z
halfway, when you use an EF-M lens with [IS mode] in [z: IS settings] set
to [Enable], or an EF or EF-S lens with the lens Image Stabilizer switch set to
<1>. The Image Stabilizer consumes battery power and may shorten the total
movie recording time depending on the shooting conditions. When the Image
Stabilizer is not necessary, such as when using a tripod, it is recommended that
you set the IS switch to <2>.
If the brightness changes as you record a movie with auto exposure, the movie
z
may appear to stop momentarily. In this case, record movies with manual
exposure.
If there is a very bright light source in the image, the bright area may appear
z
black on the screen. Movies are recorded almost exactly as they appear on the
screen.
Image noise or irregular colors may occur when shooting at high ISO speeds,
z
high temperatures, low shutter speeds, or under low light. Movies are recorded
almost exactly as they appear on the screen, except in time-lapse movie
recording.
If you play back a movie with other devices, image or sound quality may decline
z
or playback may not be possible (even if the devices support MP4 format).
282
Advertisement
Table of Contents
