Program Ae Mode (P) - Canon ICAM62B Advanced User's Manual

Program AE Mode (P)

The camera automatically sets the shutter speed and aperture to suit the
subject's brightness.
* < d > stands for Program.
* AE stands for Auto Exposure.
If the "30"" shutter speed and the lowest f/number blink, it indicates
z
underexposure.
Increase the ISO speed or use flash.
If the "1/4000" shutter speed and the highest f/number blink, it indicates
z
overexposure.
Lower the ISO speed or use an ND filter (sold separately) to reduce the amount
of light entering the lens.
106
1
Set the Mode dial to <d>.
2
Focus on the subject.
Aim the AF point over the subject and
z
press the shutter button halfway.
3
Check the display and shoot.
As long as the exposure value is not
z
blinking, standard exposure will be
obtained.