Canon ICAM62B Advanced User's Manual page 191

Table of Contents

Advertisement

Do not point the camera toward an intense light source, such as the sun or an
z
intense artificial light source. Doing so may damage the image sensor or the
camera's internal components.
Switching to AF focus mode prevents the camera from shooting unless subjects
z
are in focus. Consider setting the mode to manual focus and focusing manually
before shooting.
If the shooting time is long, using the household power outlet accessories (sold
z
separately) is recommended.
Shooting long exposures or using shutter speeds longer than the shooting
z
interval will prevent shooting at the specified interval. For this reason, fewer
shots than specified will be taken. Using shutter speeds nearly the same as the
shooting interval may also reduce the number of shots.
If the time it takes to record to the card exceeds the shooting interval due to
z
the shooting functions set or card performance, some of the shots may not be
taken with the set intervals.
When using flash with interval timer shooting, set an interval longer than the
z
flash charge time. Intervals that are too short may prevent the flash from firing.
Intervals that are too short may prevent shooting or autofocusing.
z
Interval timer shooting will be canceled and reset to [Disable] if you set the
z
power switch to <2>, set the shooting mode to < w / x >, or use EOS Utility
(EOS software).
During interval timer shooting, you cannot use remote control shooting ( = 225)
z
or remote-release shooting with a Speedlite.
Interval Timer
191

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eos m6 mark iiIcam62bkIcam62bk2aIcam62bk2

Table of Contents