Turning on the Power
Setting the Date, Time, and Time Zone
If you turn on the power switch and the date/time/zone setting screen
appears, see = 499 to set the date/time/zone.
Changing the Interface Language
To change the interface language, see = 502.
Automatic Sensor Cleaning
Whenever you set the power switch to <1> or <2>, sensor cleaning
z
will be performed automatically. (A small sound may be audible.) During
the sensor cleaning, the screen will display [ f ].
If you repeatedly turn the power switch <1>/<2> at a short
z
interval, the [ f ] icon may not be displayed. This is normal and not a
malfunction.
If you set the power switch to <2> while an image is being recorded to the
z
card, [Saving...] will be displayed and the power will turn off after the recording
finishes.
<1>
z
The camera turns on.
<2>
z
The camera is turned off and does not
function. Set the power switch to this
position when not using the camera.
49