Table of Contents
Advertisement
CAUTION
When changing the spark plug, check
the thread pitch and length.
If the threaded part is too short, the
carbon deposits will accumulate on the
thread seat, and therefore the engine
may be damaged during the installation
of the right spark plug.
Use the recommended type of spark
plugs only, see page 90 (TECHNICAL
DATA), in order not to compromise the
life and performance of the engine.
u
Check the spark plug gap with a
thickness gauge.
The spark plug gap must be 0.7 – 0.8
mm; if necessary, adjust it, bending the
centre electrode (6) with care.
u
Make sure that the washer (7) is in good
conditions.
76
use and maintenance Pegaso 650 I.E. STRADA - TRAIL
For the installation:
u
With the washer on (7), screw the spark
plug by hand in order not to damage the
thread.
u
Tighten the spark plug by means of the
spanner you will find in the tool kit, giving
it half a turn to compress the washer.
Spark plug tightening torque: 20 Nm
(2.0 kgm).
The spark plug must be well tightened,
otherwise the engine may overheat and
be seriously damaged.
WWW.PlandeGraissage.ORG
0,7
0,7 — 0,8 mm
0,8 mm
CAUTION
1
2
CAUTION
Make sure that the cap (1) is correctly
connected to the spark plug (2). Due to
t h e v i b r a t i o n s o f t h e e n g i n e , t h e
incorrect position would cause the
disconnection of the spark plug cap,
with serious damage to the engine.
u
Correctly insert the cap (1) in the spark
plug (2), until you hear the click.
Advertisement
Table of Contents
