Table of Contents
Advertisement
When battery is connected for the first
time, the instrument panel sets to running-
in rpm value, the next time battery is
connected it sets to last set value.
RUNNING-IN RPM: 5000
MINIMUM RPM: 4000
MAXIMUM RPM: 8000
When the set threshold is exceeded, the
alarm light (3) on the instrument panel
flashes until the value goes below the
threshold.
BACK LIGHTING
T h i s f u n c t i o n a l l o w s y o u t o s e t
backlighting: three levels are available.
Every time the MODE selector is pressed
to the right or to the left, the following icons
are displayed:
LOW
MEAN
HIGH
Press the MODE selector to the centre
position to set the instrument panel back to
SETTINGS MENU.
WWW.PlandeGraissage.ORG
CHANGE THE CODE
This function is used when the old code is
available and is to be changed.
Within this function, the following message
is displayed:
"INSERT THE OLD CODE"
As soon as the old code is acknowledged,
the new code is requested; the following
message is displayed:
"INSERT THE NEW CODE"
Once the operation is over, the display
goes back to DIAGNOSIS menu. If you
entered with the code, this operation will
not be allowed.
Once the operation is over, the instrument
panel goes back to SETTINGS menu.
use and maintenance Pegaso 650 I.E. STRADA - TRAIL
21
Advertisement
Table of Contents
