Avaya INDeX 9.1 Manual page 18

Setting the Ringer Timeout
Personal Alarms
INDeX 9.1 Standard Telephone
The ringer timeout controls several actions:
• Callback: How long a callback rings before cancelling.
• Group hunting: How long calls to a group of which you are a
member, ring before trying another member.
• Divert on no answer: How long calls ring at your phone before
the system uses Divert on No Answer if set.
To set the ringer timeout:
1. Lift the handset and immediately dial 0.
2. Broken dial tone: Dial 13 (ringer timeout).
3. Loud pip: Dial the phone's passcode (see page 17).
You will then hear either:-
•
Continuous tone: Passcode wrong. Replace handset.
•
Three soft-tones: Timeout already set. Dial
•
Single soft tone: No timeout set. Dial a new timeout (0 to 999
seconds - 10 seconds ≈ 3 rings) and then dial #.
•
Broken dial tone: Ringer timeout set. Replace the handset to
finish.
You can set a Personal Alarm for your phone. When it takes place,
the phone will give a repeating triple ring for 20 seconds or until you
lift and replace the handset.
• To set or alter an alarm:
Lift the handset and dial *8hhmm# where hhmm is the time in
24-hour clock format.
• To clear an alarm before it occurs:
Lift the handset and dial *8*#.
Page 18 - Other Features
to cancel.
38DHB0002UKDJ Issue 2 (12/00)