Mac-Based Vlan - Planet Networking & Communication SGS-5240 Series User Manual

4.2.4.6 MAC-Based VLAN

Switch Management > VLAN > Mac-Based Vlan page is used to configure VLAN based on MAC addresses.
To create a Mac based vlan, press New button:
 MAC Address – A source MAC address which is to be mapped to a specific VLAN. The MAC address must be specified
in the format xx-xxxx-xx-xx-xx.
 VLAN – VLAN to which ingress traffic matching the specified source MAC address is forwarded. (Range: 1-4093)
 Priority – The priority assigned to untagged ingress traffic.
(Range: 0-7, where 7 is the highest priority; Default: 0)
To delete a Mac based vlan entry, select the entry and press delete button.
User's Manual of SGS-5240 Series Managed Switch
62