EES-1024AF Intelligent Ethernet Switch
Figure 4-2 Parameter settings of communication parameters in Hyper Terminal
4.2.1
Initial Screen
At the prompt, type go and press [ENTER] to display the main screen as shown next.
4.2.2
Password Screen (optional)
If you enabled the console password login option, the following screen displays. To disable or enable this option,
see 4.4.2 Enable Console Login
4-2
Table 4-1 Field Values for Hyper Terminal in Windows
FIELD
Baud Rate
Data Bits
Parity
Stop Bit
Control flow
Type 'go' to enter main menu: go
Figure 4-3 SMT - Initial Screen
Login: root
Password:
User root logged in
Type 'go' to enter main menu or 'exit' to logout: go
Figure 4-4 SMT - Login
VALUE
9600 bps
8
none
1
None
Introducing the SMT